Aesculap Clipper Favorita II

Powerful and quiet, reliable and sturdy, developed for daily use – the machine for professionals.

low-vibration operation
proprietary, bearing-mounted Aesculap motor - Made in Germany - powerful and very long-lasting
consistently good cutting results – wear-resistant metal rocker arm
suitable for continuous operation – well-tuned ventilation system and easy-clean air filter protect against overheating and ensure a long life
low-fatigue working thanks to the slim, ergonomically designed housing made from unbreakable specialist plastic
comfortable to use – switch at the front of the machine for comfortable one-handed operation
Supplied without blade set

Ref. no.	Colour	PU		Pallet
GT101	red	1/8	1/8	72 PAL	72 PAL
GT104	red	1/7	1/7	112 PAL	112 PAL

Ref. no.	Description	PU
GT142	Aesculap Precision Adjusting Aid Torqui Favorita	1/100

Technical data	Voltage	Output	Blade set system	Drive	Drive	Stroke rate	Sound pressure level	Cable length	Weight	Protection class
GT101	110 V	30 W	Aesculap Favorita	Universal	Worm wheel	approx. 2300 strokes/min	70 dB	5 m	650 gwithout cable	II
GT104	230 V	35 W	Aesculap Favorita	Universal	Worm wheel	approx. 2300 strokes/min	70 dB	5 m	650 gwithout cable	II

Item. No.	Description	GT101	GT104
GT604	Clipper oil 90ml	x	x
GT605	Aesculap special grease 20ml	x	x
GT104212	Fan impeller		x
GT104213	Strain relief device	x	x
GT104217	Spring for lever 23	x	x
GT104218	Insulating plate	x	x
GT104225	Felt disk for top housing	x	x
GT104227	Shackle	x	x
GT104244	Slide ring for excenter wheel	x	x
GT104249	Rubber protection for switch	x	x
GT104314	Brush with spring	x	x
GT104315	Dovetail steelplate	x	x
GT104316	Lever complete	x	x
GT104319	Baeringbrush	x	x
GT104320	Baeringbrush	x	x
GT104335	Type plate as GT104334, blank		x
GT104337	Adhesive label	x	x
GT104415	Dovetail compact	x	x
GT104614	Carbon brush	x	x
GT104801	Motor housing bottom	x	x
GT104802	Motor housing top	x	x
GT104803	Air filter	x	x
GT104808	Oscillating arm of steel	x	x
GT104815	Pole Pack St. Core 230V,		x
GT104840	Worm wheel mounted	x	x
GT104850	Circuit board complete	x	x
GT104861	Rotor packed	x
GT104865	Rotor packed		x
GT105326	Protective sleeve	x	x
GT105819	Suitecase for	x	x
GT300224	Oil felt 12x9	x	x
TA003537	Screw for cable clip	x	x
TA003544	front bearing for 35104 and	x	x
TA003820	Locking washer for	x	x
TA004627	Z. tap screw B2.2x6.5	x	x
TA004631	Ball bearing rear on anchor	x	x
TA004637	Disks underneath worm wheel	x	x
TA004639	Screw for swallow tail	x	x
TA004663	Cylinder screw for plates,	x	x
TA004691	Switch	x	x
TA006196	Cable with plug, 110V	x
TA008530	Cable Clamp	x
TA013315	Sticker case for	x	x
TA013499	Torx-screw SN4850, M3x16,	x	x
TA013520	Mains cable with		x
TA021595	Connector block	x	x
TA015486	Case Insert for GT105819	x	x

Specific data